10
10.8 Administrator Settings
10-48
Utility Mode Operations Chapter 10
Setting the “Date & Time Setting” Function
This function is used to specify the current date and time. In addition, the time zone
can be set between -1200 and +1200 (in 30 minute intervals). (The default setting
is “+0000”.)
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [3/4].
6 Touch [Date & Time
Setting].
7 Touch [Year].
8 Press the [C] (clear) key.
The currently specified value is erased.
To Next Page
Loading...
