10.5 Specifying Default Settings (User’s Choice: 2 Functions)
10
10-21
Utility Mode Operations Chapter 10
Setting the “Paper Type Select” Function
This function is used to specify that special paper is loaded into any paper drawer,
other than the 1st drawer and the bypass tray. (The default setting is “Normal”.)
If a drawer is set to any setting other than “Normal”, the paper in that drawer is not
automatically selected with the “Auto Paper Select” setting or with double-sided
copying.
✎
Hint
To print on the specified special paper, manually select the paper drawer loaded
with the special paper.
1 Press the [Utility] key.
2 Touch [User’s Choice: 2].
3 Touch [2/3].
4 Touch [Paper Type
Select].
To Next Page
Loading...
