Kyocera KM-C2230

10.7 Administrator Mode Operations
10
10-31
Utility Mode Operations Chapter 10
10.7 Administrator Mode Operations
The Administrator mode allows the use of this machine to be controlled. When this
mode is selected, a screen appears, indicating that the administrator code must be
entered.
After typing in the 8-digit administrator code and touching [Enter], the following
screen appears.
(Refer to page 10-33.)
G These functions are used to set various functions in order to control the use of
this machine.
(Refer to page 10-89.)
G These functions are used to control the number of copies allowed by each
account.
G These functions are used to specify the transmission timeout time and the
screen pattern for computer printouts. For details, refer to the KM-C2230 Printer
Controller User’s Guide.