8.3 Job Control Screens
8
8-11
Managing Jobs Chapter 8
8.3 Job Control Screens
Jobs stored in the memory can be printed and jobs can be prioritized for output.
The following Job Control screens provide a variety of functions.
Hold Job Screen
Touch [Job Control]. The Hold Job screen (containing the list of jobs scanned and
stored in the memory) appears.
From the Hold Job screen, jobs can be printed and removed from the memory.
✎
Additional Information
If accounts have been specified from the Utility mode, the screen for entering
the account access code appears after [Job Control] is touched. Using the
keypad, type in the 8-digit access code, and then touch [Enter].
✎
Reference
For details on setting the “Scan to Memory” function, refer to “Storing the
Scanned Image in the Memory (“Scan to Memory” Function)” on page 7-2.
To return to the Basic screen, touch [Basic].
To delete a job, select the job, and then touch [Delete].
The following details of the jobs are displayed.
3 4 5 6 7 8 9
2
1
2
To Next Page
Loading...
