10
10.5 Specifying Default Settings (User’s Choice: 2 Functions)
10-16
Utility Mode Operations Chapter 10
10.5 Specifying Default Settings (User’s Choice: 2
Functions)
Setting the “Language Select” Function
This function is used to change the display language for the screens in the touch
panel. (The default setting is “English”.)
1 Press the [Utility] key.
2 Touch [User’s Choice: 2].
3 Touch [Language
Select].
4 Touch the key for the
desired language.
5 Touch [Enter].
6 Touch [Exit], and then
touch [Exit] in the Utility
screen.
The Basic screen
appears again.
To Next Page
Loading...
