10
10.5 Specifying Default Settings (User’s Choice: 2 Functions)
10-26
Utility Mode Operations Chapter 10
Setting the “Centering” Function
This function is used to specify where the image is positioned when the document
is smaller than the paper.
(The default setting is “Yes”.)
1 Press the [Utility] key.
2 Touch [User’s Choice: 2].
3 Touch [2/3].
4 Touch [Centering].
5 Touch the key for the
desired setting.
6 Touch [Enter].
7 Touch [Exit], and then
touch [Exit] in the Utility
screen.
The Basic screen
appears again.
To Next Page
Loading...
