3
3.7 Selecting Original Settings
3-36
Basic Copy Operations Chapter 3
3 Touch [▲] below the
Original Direction
setting appropriate for
the document to be
copied, and then touch
[Enter].
✎
Hint
When copying a
double-sided
document or using
a double-sided,
2in1 or 4in1 Copy
setting, if the
document
orientation and
document loading
direction are not
specified, the
copies may not be
printed in the
correct page order
or with the correct
page arrangement.
4 Touch [Margin].
The Margin screen
appears.
5 Touch [▲] below the
Margin setting
appropriate for the
document to be copied,
and then touch [Enter].
❍ If the position of the
binding margin for
the document is different from the selected Margin setting, copies made
while erasing certain areas will not be printed correctly.
❍ When loading a document with a binding margin, position the top of the
document toward the rear of this machine. For details, refer to “Feeding the
Document” on page 2-41.
6 If a thick document is being copied, touch [Thick Original].
To Next Page
Loading...
