10.8 Administrator Settings
10
10-53
Utility Mode Operations Chapter 10
7 Touch the key for the
desired setting.
8 Touch [Enter].
❍ If “No” was
selected, the
screen shown in
step 6 appears.
❍ If “Yes” was
selected, continue
with step 9.
9 Using the keyboard that appears on the screen, type in the 8-character
password, and then touch [Enter].
❍ The keypad can also be used to type in the password.
❍ If [Cancel] is touched, the password is not specified. The screen shown in
step 6 appears again.
❍ To enter uppercase letters, touch [CAPS].
❍ To delete characters that have been entered, touch [Del.].
The “Retype New Password” box appears.
To Next Page
Loading...
