11
11.7 When the Inspection Mark “” Appears
11-62
Touch Panel Messages Chapter 11
11.7 When the Inspection Mark “” Appears
When the inspection mark ( ) appears in the lower-left corner of the Basic
screen, the image stabilization or printing or scanning functions have become
unstable.
✎
Reminder!
If appears in the display, contact your service representative. When
contacting the service representative, inform them of the numbers (“S-1” for the
example shown above) listed in the screen that appears.
Touching the inspection mark ( ) that appears in the Basic screen displays a
screen like that shown below.
To Next Page
Loading...
