2.2 Part Names and Their Functions
2
2-13
Before Making Copies Chapter 2
11 [C] (clear) key Press to erase a value (such as the number of copies, a zoom
ratio, or a size) entered using the keypad.
12 [Stop] key Press the [Stop] key during copying to stop the copy operation.
13 [Start] key • Press to start copying. When this machine is ready to begin
copying, the indicator on the [Start] key lights up in green. If
the indicator on the [Start] key lights up in orange, copying
cannot begin.
• Press to restart a stopped job. For details on jobs, refer to
“Overview of Jobs” on page 8-2.
14 Contrast dial Use to adjust the contrast of the touch panel.
15 [Enlarge Display] key Press to enter Enlarge Display mode.
16 [Accessibility] key Press to display the screen for specifying user accessibility
functions.
17 [Mode Check] key Press to display screens showing the specified settings.
No. Part Name Description
To Next Page
Loading...
