2.6 Loading Paper Into the 1st Drawer
2
2-27
Before Making Copies Chapter 2
4 For Over Size Paper, adjust the
trailing-edge guides as shown in
the illustration.
5 Load the paper into the drawer
so that the side of the paper to be
printed on (the side facing up
when the package was
unwrapped) faces up.
✎
Reminder!
If the paper is curled, flatten it
before loading it.
Do not load so many pages
that the top of the stack is
higher than the
M mark.
No more than 20 sheets of paper other than plain paper can be loaded.
Trailing-edge
guide
Trailing-edge
guide
▼ mark
To Next Page
Loading...
