Leibinger JET3 Series - Date and Time; Figure 44 Set Date

Page 122 Job Editor Group 8
Release 2.02 JET3 Series
7.3.1.2 Date and time
Under the tab <Date/Time> you can set the current time, the time zone, the current date
and the date format as well as the automatic change from summertime (daylight saving
time-[DST]) to wintertime.
1. Set date:
Proceeding:
 Press on the tab <Date/Time> (2) to select the tab.
 Press on the arrow key of the drop-down list <Date> (3). A calendar (4) opens.
 Select the requested date. The calendar will be automatically closed and the
selected date is taken over.
Figure
44
Set date
1 – Dialog box <Basic Settings>
3 – Drop-down list <Date>
2 – Tab <Date/Time>
4 – Calendar
2
1
3
4