Leibinger JET3 Series - Figure 158 - Sensor Distance - Determination of Stroke Positions with Two Sensors

Page 284 Job Editor Group 8
Release 2.02 JET3 Series
Figure
158
Sensor distance – speed and positioning determination with two sensors
1 – Both sensors at the same height
6 – Input field <Sensor distance>
2 – Distance between sensors <A>
7 – Sensor 1 – Start measurement –
Connected to X5.5.
3 – Maximum <Sensor distance>
8 – Sensor 2 – Stop measurement –
Connected to X5.4. This sensors
works also as PrintGo sensor
4 – The Distance A (between the 2 sensors)
has to be smaller than Distance B
(between the products)
9 – Input field <intern Speed>
5 – Wrong setup – more than one product
between the 2 sensors
Wrong setup!
6
9
A
1
2
3
4
5
7
8