Leibinger JET3 Series - Figure 58 Remote Control - Connection Scheme

Group 8 Job Editor Page 143
JET3 Series Release 2.02
Information
Please contact your system administrator in order to implement the
LEIBINGER Printer printer in a local network. LEIBINGER cannot be held
liable for any malfunctions caused by inappropriate network settings!
The software suggested are to be understood as examples.
The suggested software are no LEIBINGER products nor it will be
supported by LEIBINGER.
Figure
58
Remote Control – Connection scheme
Tablet WiFi connection
Connected to router by WiFi.
Using the SSID and password of the
WiFi router
LEIBINGER Printer
VNC Client software is required
A cable for the M12D coded socket of the
Printer is required.
Notebook WiFi connection
Connected to router by WiFi. Using the
SSID and password of the WiFi router
VNC Client software is required
Example:
Example:
Printer IP-Address:
192.168.1.10
Subnet mask:
255.255.0.0
Router IP-Address:
192.168.1.1
Desktop PC cable connection
Connected to router by cable
VNC Client software is required
Example:
Desktop PC IP-Address: 192.168.1.5
The address has to be within the address space of the router.