The resetting of the replacements has only effects on the selected printing
element!
The replacement function is always active and therefore the default settings
are active as long as there are no customized settings!
E.g. the default replacement setting for the <Months> element is 1=01,
2=02, 3=03, 4=04 etc. That means that checking off the <left-hand-
zeros> check box in the date/time tab of the objects settings wouldn’t
have an effect on the display of the <Months> element as long as the
replacement settings weren’t changed to 1=1, 2=2, 3=3, 4=4 etc.
With the button <OK> (7) you can confirm changes and close the dialog box.
The button <Cancel> (8) closes the dialog box without saving changes.
To Next Page
