Leibinger JET3 Series - Graphic Editor - Settings

Group 8 Job Editor Page 209
JET3 Series Release 2.02
7.5.6.7 Graphic editor - Settings
The drop-down menu <View> provides several tools for zooming, the editor size and the
grid. The following functions are available:
 Enlarge and reduce display size (Zoom in/out)
 Show grid
 Settings
With the option <Settings> you can set the editor size (width and height of the drawing
area) as well as the grid size.
Proceeding:
 Press the menu item <Settings> (2) from the drop-down menu <View> (1)
 The dialog box <Editor Settings> (3) pops up.
 With the Arrow keys (4) you can increase or reduce the values of the editor size and
the grid size stepwise.
or
 Click in the input field (5) of the value to be changed. A Numeric keypad opens for
input.
INFORMATION
You will find further information regarding the working with keyboard in the
chapter 6.4.1 Numeric keypad
 Close the dialog box with the <OK> (6) button.
Note:
Regardless of the grid, points are always created with a 1x1 size. Lines, circles and
rectangles are created with a grid width of 1
INFORMATION
You will find further information about the tools in <View> menu in the
chapter 7.5.6.4 View menu