Page 208 Job Editor Group 8
Release 2.02 JET3 Series
Select <Save as> (2) from the drop-down menu <File> (1).
The <Save as> dialog box (3) pops up.
The names of the already existing graphics are displayed in the <Graphic file list>
(4). Select a storage device from the <Search in> drop-down list (5).
Click in the input field <Filename> (6). A software keyboard (7) pops up.
You will find further information regarding the working with keyboard in the
chapter 6.4.2 Keyboard
Enter the file name.
Press the button <Enter> (8) of the keyboard. The entered name will be taken over to
the input field <Filename> (6).
Clicking on the <Save> button (9) will save the file. Clicking on the <Cancel> button
(10) will close the dialog box without any changes.
To Next Page
