All characters following the <Start symbol> in the transmitted string will be written into
the input buffer until a <End symbol> is received. If another <Start symbol> is
received before the <End symbol> was received the current input buffer content will be
discarded and the filling of the buffer will start again.
The number of characters between a <Start symbol> and a <End symbol> may be
shorter than the number of characters defined by the <Wildcards> parameter. In that
case the input buffer is only filled with the relevant characters. If the number of
characters exceeds the number defined by the <Wildcards> before the <End symbol>
is received only the number of characters that are equivalent with the size of the input
buffer will be taken into account. In that case the input buffer is filled with the first
received characters up to the number defined by the size of the input buffer.
To Next Page
