xiv
D-H023.0906EN
innovators in agriculture
7.10.4 Replace the Cleaning Brushes 7-45
7.11 Support Systems 7-46
7.11.1 Examine the Air Compressor and the Air Dryer 7-46
7.11.2 Examine the vacuum pump oil level 7-46
7.11.3 Clean the Exterior of the Vacuum Pump 7-47
7.12 Control Systems 7-49
7.12.1 Examine the Attention Alarms 7-49
7.12.2 Examine the Attention List 7-49
7.12.3 Examine the Robot Performance List 7-50
7.12.4 Clean the Touch Screen of the X-Link 7-50
8. Test and Adjustment 8-1
8.1 Covers and Doors 8-1
8.2 Box 8-1
8.3 Feeding System 8-1
8.3.1 Calibrate the Feed Portion 8-1
8.4 Robot Arm System 8-2
8.4.1 Shorten the Cup Cords 8-2
8.5 Milking System 8-5
8.6 Milk Transport System 8-6
8.6.1 Manually add a Cow for Calving 8-6
8.6.2 Manually add a Cow for Dry Off 8-7
8.6.3 Manually add the Milk Separation of a Cow 8-9
8.7 Cleaning Systems 8-11
8.7.1 Test the Spray Beam of the Teat Disinfection Nozzle 8-11
8.7.2 Test the Spray Beam of the Disinfection Nozzle for the Cleaning Brushes 8-11
8.7.3 Measure the Concentration of Astri-L 8-12
8.7.4 Measure the Temperature of the Hot Cleaning Water 8-12
8.7.5 Adjust the Astri-Cid:Astri-Lin Ratio 8-13
8.7.6 Adjust the Quantity of Pre-treatments 8-13
8.8 Alarm System 8-14
8.8.1 Set the CRS+ to generate an Alarm or Phone Call 8-14
8.9 Support Systems 8-14
8.9.1 Test the Save-Life Switch 8-14
8.9.2 Test the Earthing 8-16
To Next Page
Loading...
