9400 regenerative power supply module | Parameter setting
Parameter reference
Structure of the parameter descriptions
266 L EDS94ARNExxxx EN 2.3 - 06/2014
10.1 Structure of the parameter descriptions
Each parameter is described in the Parameter list
in the form of a table which consists of
the following three areas:
Table header
The table header contains the following general notes:
Parameter number (Cxxxxx)
Parameter name (display text in the »Engineer» and keypad)
Data type
Decimal and hexadecimal parameter index for access via bus systems
Table contents
The table contains further general explanations & notes on the parameter and the possible
settings. The representation of the possible settings depends on the parameter type:
Parameters with read-only access
Parameters with write access
Table footer
The table footer contains the Parameter attributes
.
10.1.1 Data type
The following data types are available for parameters:
Data type Meaning
INTEGER_8 8-bit value with sign
INTEGER_16 16-bit value with sign
INTEGER_32 32-bit value with sign
INTEGER_64 64-bit value with sign
UNSIGNED_8 8-bit value without sign
UNSIGNED_16 16-bit value without sign
UNSIGNED_32 32-bit value without sign
UNSIGNED_64 64-bit value without sign
FLOATING_POINT 32-bit floating point number
VISIBLE_STRING Character string of printable characters
OCTET_STRING Character string of any characters
BITFIELD_8 8-bit value bit-coded
BITFIELD_16 16-bit value bit-coded
BITFIELD_32 32-bit value bit-coded
To Next Page
Loading...
