Quick Start LiveU LU600 User Guide
Quick Start
This chapter describes how to get started using the LU600 and describes the Home screen
and its options.
Getting Started
The following describes the basic workflow for using the LU600:
1 Power on the LU600 as described in the Powering On the LU600 Unit section on
page 22.
2 Connect a video camera to the unit, as described in the Connecting the Video
Camera section on page 24.
3 Select the mode of operation as described in the Streaming Operation Mode
Selection section on page 26.
4 [optionally] If you have the Metadata service enabled for your unit, set the
metadata fields accordingly, as described in the chapter on Metadata, page 74
5 Based on the current mode of operation, do the following:
For Live mode, set the delay, as described in the Setting Delay section on page
32.
For Store & Forward mode, set the quality and codec for streaming. For more
details, refer to the Specifying Store & Forward Streaming Quality section on
page 27.
6 Select the output channel for your transmission as described in Selecting an Output
Channel section on page 28.
7 Start streaming, as described in the Going Live section on page 43.
To Next Page
Loading...
