LiveU LU600 - Using the LU600 Unit; Powering On and Charging

Using the LU600 LiveU LU600 User Guide
22
3
Using the LU600
This chapter describes the functionality of the LU600 and its operation. It contains the
following sections:
• Powering On the LU600 Unit, page 22
• Connecting the Video Camera, page 24
• Streaming Operation Mode Selection, page 26
• Specifying Store & Forward Streaming Quality, page 27
• Setting Delay, page 32
• Handling Network Connections, page 33
• Going Live, page 43
• Shutting Down, page 44
Powering On the LU600 Unit
The following describes the procedure for charging and turning on the LU600.
Charging the LU600
The LU600 comes with a battery that enables up to four hours of standalone operation
when fully charged. If this is the first time that this LU600 is being used, then you may
have to attach the battery to the main unit as described in the Attaching and Replacing a
Battery section on page 86. We recommend charging the battery for at least 6 hours before
first using the LU600.
To charge the battery:
• Plug the AC Power Adapter into the DC IN connector on the LU600 while the battery
is connected to the LU600.