LiveU LU600 - Handling the LU600; Inserting a Module SIM Card; Attaching and Replacing Battery

Handling the LU600 LiveU LU600 User Guide
81
12
Handling the LU600
This chapter describes how to perform various tasks for handling the LU600, such as
replacing the battery, inserting SIM cards and so on.
This chapter contains the following sections:
• Inserting a Module SIM Card, page 81
• Dual-SIM Module Installation, page 84
• Connecting an Extra (9
th
) Modem/Module, page 84
• Attaching and Replacing a Battery, page 86
• Ethernet Connection, page 88
• Connecting to the Xtender, page 88
Inserting a Module SIM Card
The LU600 is provided with communication modules already inserted. These modules may
already have SIM cards inserted into them. If so, then you can skip reading this section.
NOTE
After inserting a module and/or SIM card, the LU600 will automatically
discover
the operator’s name and the Access Point Number (APN), and display
them in the Interfaces screen within 15 to 30 seconds. If necessary the APN
can also be configured remotely via LiveU Central.
NOTE
This procedure should also be performed when inserting or replacing a SIM
card.