LSIS SV-iS7 series - How to Separate IP54 Front Cover; How to Separate IP54 Keypad Cover and Keypad; Installation Guide (UL Enclosed Type12, IP54 Type)

Chapter 3 Installation
3-25
3.1.6 Installation Guide (UL Enclosed Type12, IP54 Type)
1) How to separate IP54 keypad cover and keypad
- Release the upper/lower screw on the transparent keypad cover and then separate
the transparent cover from the inverter.
- Separate the keypad from the inverter.
2) How to separate IP54 front cover
- Loosen the captive screws (nine or thirteen, depending on the size of the frame)
around the edge of the cover.
- Remove the cover.