LSIS SV-iS7 series User Manual

Chapter 5 How to Use Keypad
5-17
5.1.9 How to initialize parameter
You can initialize the parameter that has been changed by the user to the initial
state at the time of delivery. Not only the entire parameter but a group of the
parameter mode can be selected and initialized.
- Monitor Mode is displayed.
- Shift to CNF by using Mode key.
- Shift to code 40 using Down key.
- Press PR OG.
- Of the Parameter items to initialize, select All
Groups and press PROG.
- Initialization finished, you come back to the
initialization selection display.
MON T/K N STP
0.0A
CNF N STP 0.0A
00 Jump Code
9 CODE
01 language Sel
English
02 Inv S/W Ver
Version 1.00
CNF N STP 0.0A
31 Option-2 Type
None
32 Option-3 Type
None
40 Parameter Init
----- No ------
CNF N STP 0.0A
40 Parameter Init
------ No ------
1 All Groups
2 DRV
CNF N STP 0.0A
31 Option-2 Type
None
32 Option-3 Type
None
40 Parameter Init
----- No ------

LSIS SV-iS7 series Specifications

General

Brand	LSIS
Model	SV-iS7 series
Category	Inverter
Language	English