LSIS SV-iS7 series - How to Separate Front Cover When Wiring; How to Assemble Plug When Connecting Keypad; How to Separate Keypad

Chapter 4 Wiring
4-3
4.1.1 How to separate front cover when wiring
Remove Keypad on the product and release fixed volt of the lower end of up cover.
1) How to separate Keypad
2) How to assemble plug when connecting Keypad
As showing figures below, install the keypad after connecting the plug.
Under pressing the
lower end of keypad,
pull the upper part of
keypad.
Connection wire
for Loader when
keypad is
disconnected.