LSIS SV-iS7 series User Manual

Chapter 5 How to Use Keypad
5-13
5.1.7 Operating status monitoring
1) Using monitor mode
You can monitor 3 items at a time in Monitor Mode. Some items including
frequency can be edited. Displayed items can be selected by the user in
Config Mode(CNF).
- This is the initial display of Monitor Mode.
- The frequency, current and voltage are set as
the default monitor items at the time of product
delivery.
- Of the displayed items, for frequency, the goal
frequency is displayed during stop and
operating frequency during operation.
- You can set the items to display in Monitor
Mode in sequence at 21~23 in CNF.
- Move to 23 using Down key.
- Change the 23 item in Monitor Mode to output
power.
- The third displayed item in Monitor Mode has
been changed to output power.
MON T/K N STP 0.00Hz
1
MON T/K N STP 0.00Hz
kW
A
Hz
CNF N STP 0.00Hz
21 Monitor Line-1
Frequency
22 Monitor Line-2
Output Current
23 Monitor Line-3
Output Power
CNF N STP 0.00Hz
21 Monitor Line-1
Frequency
22 Monitor Line-2
Output Current
23 Monitor Line-3
Output Voltage

LSIS SV-iS7 series Specifications

General

Brand	LSIS
Model	SV-iS7 series
Category	Inverter
Language	English