EasyManua.ls Logo

Lucent Technologies FiberReach DDM-2000 - Page 134

Lucent Technologies FiberReach DDM-2000
1896 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
363-206-305
Applications
2-48
Issue 3 June 2000
Basic Narrowband Shelf
Configurations
2
The
SLC
-2000 system can host a DDM-2000 FiberReach Narrowband shelf
(NBS) optical network unit (ONU) through an OC-1 ring using DDM-2000
FiberReach Wideband shelves (WBSs). Figure 2-37 and Figure 2-38 show the
following typical applications:
WBS Collocated with the SLC-2000 system (Figure 2-37):
In this
configuration, the collocated WBS is part of an OC-1 ring. This
configuration requires a DDM-2000 OC-3 shelf or a
SLC
-2000 ARM shelf
to be part of the ring and host the WBSs.
SLC-2000 J1C265AA-1, L4 ARM Shelf with 26G2-U OLIUs
(Figure 2-38):
In this configuration, the J1C265AA-1, L4 ARM shelf
contains 26G2-U OLIUs in Function Group C as part of the OC-1 ring. The
SLC-2000 system must contain SONET Subsystem Software Release R13
or later and the WBSs in the ring must contain FiberReach Software R3.0
or later. This configuration eliminates the need for a collocated WBS and a
DDM-2000 OC-3 shelf to host the WBSs in the OC-1 ring. In this
configuration, the 28 DS1 pipes are not accessible from the DS1 low-speed
slots in Function Group C of the ARM shelf. However, as shown in
Figure 2-39, DS1 pipes are accessible from any of the WBSs on the ring if
the bandwidth to support them is available on the OC-1 ring.

Table of Contents

Related product manuals