Lucent Technologies FiberReach DDM-2000 - Rtrv-Fecom

RTRV-FECOM 2of1Page RTRV-FECOM
NAME
CommunicationsFar-endRetrievertrv-fecom:
FORMATINPUT
rtrv-fecom:[ Address ];
DESCRIPTION
(NE’s)element’snetworkaofstateprovisionedthedisplayscommandThis
thebysetas(DCC),channelscommunicationdatasection set-fecom
command.
lineSONETtheinchannelcommunicationsoverheadembeddedanisDCCThe
alarm,carriesDCCThemaintenance.andcommunicationsend-to-endforused
NEs.betweeninformationstatusandcontrol,
is:parameterinputThe
Address isvaluedefaultTheDCC.theofaddresstheisAddress
dcc-all.
Addresses:Valid dcc-{m1,m2,all}
laterand4.0ReleaseFiberReachFor dcc-m addressvalidais
thetosetisinterfacemainOC-12orOC-3thewhen identical
mode.dcc
follows:asappearsreportoutputcommunicationfar-endThe
tropeRnoitarugifnoCnoitacinummoCdnEraF*/
=================================================== ==============
CCDsnoitacinummoCCCD
SU/SNsserddA
=================================================== ==============
sudelbane1m-ccd
sndelbasid2m-ccd
/*
11-130 2000June3Issue FiberReachDDM-2000