Lucent Technologies FiberReach DDM-2000 - Set-Fecom

SET-FECOM 3of1Page SET-FECOM
NAME
CommunicationsFar-EndSetset-fecom:
FORMATINPUT
set-fecom: Address [:com= Communications ][,nsus= NS/US ];
DESCRIPTION
datasectiontheovercommunicationdisablesorenablescommandThis
overheadembeddedanisDCCA(DCC).channelscommunication
communicationsend-to-endforusedlineSONETtheinchannelcommunications
informationstatusandcontrol,alarm,carriesDCCThemaintenance.and
(NEs).elementsnetworkbetween
NOTE:
only.usersprivilegedtoavailableiscommandThis
isitifsuccessfullycompletewillcommandthis3.0,ReleasewithStarting
session.loginremoteaduringexecuted
are:parametersinputThe
Address DCC.theofaddresstheidentifiesAddress
Addresses:Valid dcc-{m1,m2,all}
later,andR4.0FiberReachwithStarting dcc-m validonlytheis
thetosetisinterfaceOC-12orOC-3Mainthewhenaddress
thewithmodedcc"identical" set-oc3 or set-oc12 command.
com specifiedaovercommunicationwhetherindicatesparameterThis
arevaluesvalidThedisabled.orenabledisDCC enabled or
disabled isvaluedefaultThe. enabled.
nsus DCCtheofidentificationtheis(NS/US)NetworkSide/UserSide
NS/USitsdefinemustNEtheonDCCEachNE.theforidentity
sametheisparameterNS/UStheWhennetwork.OSItheinidentity
havemayNetworkSide/UserSideactive.isalarmanends,bothat
values:parameterfollowingthe
ns abetoDCCtheofendthisdefines(NS)SideNetwork
terminationeithernetworksDDM-2000Forsite.network
othertheaslongasvaluethisbecanDCCtheof
theonlistedarevaluesDefaultdifferent.istermination
page.following
us userabetoDCCtheofendthisdefines(US)SideUser
theofterminationeithernetworks,DDM-2000Forsite.
isterminationothertheaslongasvaluethisbecanDCC
page.followingtheonlistedarevaluesDefaultdifferent.
11-260 2000June3Issue FiberReachDDM-2000