Lucent Technologies FiberReach DDM-2000 - Switch-Sync

SWITCH-SYNC 4of1Page SWITCH-SYNC
NAME
SynchronizationSwitchProtectionswitch-sync:
FORMATINPUT
switch-sync:s= SyncFunction ,pri= Priority ;
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
switching.protectionsynchronizationtheofoperationcontrolscommandThis
andusedisreferencesynchronizationwhichcontrolusertheletscommandThis
needed.whenreferencesynchronizationaswitchtousertheenables
are:parametersinputThe
s theofonebemayandfunctionsynchronizationthespecifiesSyncFunction
following:
mode onlySpecifymode.timingofswitchingprotectionSelects
forprovisionedissystemtheif LineTimed.
circuitpack Inpacks.circuittimingofswitchingprotectionSelects
protectionselectsFiberReachlater,and3.0Release
currentlyisthatpackcircuitOLIUmaintheofswitching
otherthetosystemtheforsourceline-timingtheasused
aninresultalsowillThispack.circuitOLIUmain
switch.equipmentOLIUmain"active-fn"
src bewillline-timingshelfwhichfromlineopticaltheSelects
becanthatSynchronizationSourcesThederived.
areswitched main-1 and main-2.
pri request.switchingprotectiontheofprioritytheindicatesPriority
ofvalueSyncFunctionaforlater,and3.0ReleaseFiberReachIn
circuitpack (prioritythe, pri is:value)
manual standbytopackcircuittimingactivefromSwitch
packcircuittiming
ofvalueSyncFunctionaFor mode (prioritythe, pri are:values)
reset theallowwillThisswitch.manualactiveanyClear
tobackswitchtosystem LineTimed systemtheif
iforswitchingmodenon-revertiveforprovisionedis
mode.holdovertoswitchedmanuallybeenhasit
manual mode,timingprovisionedthefromSwitch
LineTimed willsystemThemode.holdoverto,
reset.isswitchtheuntilmodeholdoverinremain
FiberReachDDM-2000 2000June3Issue 11-367