Lucent Technologies FiberReach DDM-2000 - Software and Circuit Pack Compatibility Matrix

363-206-305
Administration and Provisioning
Issue 3 June 2000
8-15
Table 8-3. Software and Circuit Pack Compatibility Matrix
FiberReach Product/Release MAIN FN Low-Speed Groups SYSCTL
Release 2.2 26G-U
26G2-U
— BBF1B
BBF3B
BBF6
177A
*
* The 177A retainer is required in any unused low-speed slots when partially equipped and 1X7 protected.
BBG8/
BBG8B
28G-U/
28G2-U
— BBF1B
BBF3B
BBF6
BBF8
+
177A*
Release 3.0 26G-U
26G2-U
— BBF1B
BBF3B
BBF6
177A*
BBG8/
BBG8B
Release 3.1 26G-U
26G2-U
— BBF1B
BBF3B
BBF6
177A*
BBG8/
BBG8B
28G-U/
28G2-U
22-Type — BBG8/
BBG8B
BBG19
BBG4
BBG4B
BBF1B
BBF3B
BBF6
BBF8*
+
177A*
Release 4.0 26G-U
26G2-U
BBG19
BBG4
BBG4B
BBF1B
BBF3B
BBF6
177A*
BBG8/
BBG8B
28G-U
28G2-U
22-Type — BBG8/
BBG8B
BBG19
BBG4
BBG4B
BBF1B
BBF3B
BBF6
BBF8*
†
177A*
† The following rules and restrictions apply when mixing HDSL with Quad DS1 packs:
-In 1x1, up to 2 BBF1(B) or BBF3(B), 1 for service and 1 for protect, can be mixed with up to 2 BBF8s, one for
service and one for protect.
-In 1x7, if 3 HDSL (BBF8) circuit packs are used in Low Speed (either 1 for protect and 2 for service, or 0 for
protect and 3 for service), no mixing is allowed.
-Up to 2 BBF8s can be mixed with up to 3 BBF1(B)/BBF3(B). No protect of either circuit pack type is allowed.
-Up to 1 BBF8 can be mixed with up to 5 BBF1(B)/BBF3(B). No protect of either circuit pack type is allowed.
-If Low Speed is equipped with 8 BBF1(B)/BBF3(B), then no BBF8 is allowed.
-No T1EXT can be mixed with HDSL.
29G-U/
29H-U
22-Type BBF1B BBG8/
BBG8B
BBG19
BBG4
BBG4B
BBF3B
BBF6
BBF8*
+
177A*