Issue 3 June 2000
xxvii
Figures
About This Document
1 Safety Label Position on FiberReach Shelf xlix
2 Static Control Wrist Strap lii
3 Product Support lxvii
1 System Introduction
1-1 Example of DDM-2000 FiberReach
Multiplexer in the Network 1-6
2 Applications
2-1 Path Switched Ring 2-4
2-2 OC-3 Path Switched Ring Using OC-3
Multiplexer and FiberReach Multiplexer
With OC-3 Optics 2-6
2-3 OC-12 Path Switched Ring Using DDM-2000
OC-12, OC-3, and FiberReach
Multiplexers With OC-12 Optics 2-8
2-4 DDM-2000 FiberReach Rings Single Homing to a
DDM-2000 OC-3 Ring 2-11
2-5 DDM-2000 FiberReach Rings Single Homing to a
DDM-2000 OC-12 Ring 2-12
2-6 DDM-2000 FiberReach Dual Homing to a
DDM-2000 OC-3/OC-12 Ring 2-13
2-7 DDM-2000 FiberReach Ring Dual Homing to a
DDM-2000 OC-3 Ring in a Dual Wire
Center Application 2-14
2-8 DDM-2000 FiberReach Ring Dual Homing to a
DDM-2000 OC-12 Ring in a Dual Wire
Center Application 2-15
2-9 Single-Homed OC-1 Ring to a DDM-2000
OC-3 Linear Application 2-16
2-10 DDM-2000 FiberReach Stand-Alone OC-1 Ring 2-17
2-17
2-16
2-15
2-14
2-13
2-12
2-11
2-8
2-6
2-4
1-6
lxvii
lii
xlix
To Next Page
Loading...