Lucent Technologies FiberReach DDM-2000 - Set-State-Sts1

SET-STATE-STS1 3of1Page SET-STATE-STS1
NAME
ChannelsSTS-1ofStateSetset-state-sts1:
FORMATINPUT
set-state-sts1: Address :ps= PrimaryState ;
DESCRIPTION
offandonturntousedisItchannels.STS-1ofstatesthesetscommandThis
channels.specifiedforsignalsmaintenanceandfailuressignalofmonitoringthe
are:parametersinputThe
Address are:addressesValidchannel(s).STS-1theidentifiesAddress
validslots,unitMaininOLIUs26-typewithequippedisshelftheIf
are:addresses m-1.
(inslotsunitMaininOLIUs28-typewithequippedisshelftheIf
are:addressesvalidthelater),and3.1FiberReach
m-{1-3,all}all,
4.0)Releasewith(starting29-typewithequippedisshelftheIf
AddressesunitMainvalidslots,unitMainitsinpackscircuitOLIU
are:
all,m-{1-12,all}
for:setbecanstatesChannel
thatinterfacesOC-12orOC-3OC-1,withinchannelsSTS-1
interfacesDS1orDS3tocross-connectedare
orOC-1OC-3,anfromdroppedarethatchannelsSTS-1
DS1,toslotsunitMainthein(29-type)interfaceringOC-12
and3.1,ReleaseFiberReachwith(startinginterfaceDS3or
unitfunctiontheinpackscircuitDS3withequippedwhen
slots).
ps theofonehavemaywhichstatechanneltheisPrimaryState
values:following
auto theMonitorautomatic.tostatechanneltheSet
conditions.statusoralarmreportnotdobutchannel,
changeautomaticallydetected,issignalgoodaWhen
normalbeginandin-servicetostatechannelthe
conditions.statusandalarmofreporting
nmon reportnotDomonitored.nottostatechanneltheSet
notDochannel.theforconditionsstatusoralarm
issignalgoodaifin-servicetostatechannelthechange
theuntilstatethisinremainwillchannelThedetected.
theuntilorcommandthiswithagainchangedisstate
FiberReachDDM-2000 2000June3Issue 11-319