Lucent Technologies FiberReach DDM-2000 User Manual

Issue 3 June 2000
8-1
8
Administration and Provisioning
8
Overview
8
This chapter describes the administration and provisioning features of the
DDM-2000 FiberReach Multiplexer narrowband shelf and wideband shelves. The
following topics are described in addition to the administration and provisioning
features:
■
Multiplexing and mapping
■
Cross-connection provisioning for linear and ring networks
■
Listing of provisionable parameters with their ranges and default values.
Wideband Shelf Administration
8
Version Recognition
8
The DDM-2000 FiberReach Multiplexer provides automatic version recognition of
all hardware, firmware, and software installed in the system. Each circuit pack
CLEI
*
code, equipment catalog item (ECI) code, apparatus code and series
number, and serial number is stored on the circuit pack and is accessible by the
system controller (SYSCTL) via the craft interface terminal (CIT). Circuit packs
with socketed devices also report those devices and program identification (PID)
* COMMON LANGUAGE is a registered trademark and CLEI, CLLI, CLCI, and CLFI are
trademarks of Telcordia Technologies.

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English