Lucent Technologies FiberReach DDM-2000 - Switch-Path-Sts1

SWITCH-PATH-STS1 4of1Page SWITCH-PATH-STS1
NAME
STS-1PathSwitchswitch-path-sts1:
FORMATINPUT
switch-path-sts1: Address :pri= Priority ;
DESCRIPTION
ringprotectedpathonswitchingpathSTS-1controlscommandThis
(one-way).unidirectionalalwaysisswitchingPathconfigurations.
26-3.1),(Release28-typewithequippedisshelftheifallowediscommandThis
(exceptpackscircuitDS3allandMaininOLIUs4.0)(Release29-typeortype
slots.unitFunctiontheinBBG19)
are:parametersinputThe
Address carryingcurrentlychannelSTS-1theofaddresstheisAddress
bewilltrafficexecuted,iscommandthisWhentraffic.dropped
ring.theonpathotherthetopaththisfromawayswitched
provisionedConnectionsparameter.thisfordefaultnoisThere
switched.becannotDS30x1orring0x1as
OLIU):(28-typeAddressesOC-3Valid m{1,2}-{1-3,all}
packs)circuitDS3BBG4/BBG4Bto(Applicable
Addresses:OC-12Valid m{1,2}-{1-12,all}
Main)inOLIUlater)and4.0(Release(29G-U
Addresses:OC-1Valid m{1,2}-1
Main)inOLIUlater)and4.0(Release(29G-U
pri request.switchprotectiontheofprioritytheindicatesPriority
isvaluevalidonlyandoneThe manual arequestsThis.
aunlesspathstandbythetopathaddressedthefromswitch
standbytheonexistsdegradesignalpathorfailsignalpath
path.
11-360 2000June3Issue FiberReachDDM-2000