Lucent Technologies FiberReach DDM-2000 - Rls-Lpbk-T3

RLS-LPBK-T3 1of1Page RLS-LPBK-T3
NAME
Release-Loopback-T3rls-lpbk-t3:
FORMATINPUT
rls-lpbk-t3: Address [:lpbktype= LoopbackType ];
DESCRIPTION
anbyestablishedpreviouslyportDS3aonloopbackareleasescommandThis
opr-lpbk-t3 command.
isshelftheifallowediscommandthis3.1,ReleaseFiberReachwithStarting
unitFunctiontheinpackscircuitDS3andMaininOLIUs28-typewithequipped
slots.
equippedisshelftheifalsoallowediscommandthis4.0,ReleaseFiberReachIn
slots.unitFunctiontheinpackscircuitDS3andMaininOLIUs26/29-typewith
is:parameterinputThe
Address released.betoisloopbackawhereport(s)DS3ofAddress
(BBG4/BBG4B):AddressesPortDS3Valid {f,all}
(BBG19):AddressesPortDS3Valid f-{1-2,all}all,
lpbktype facility.orterminalisloopbackthewhetherspecifiesLoopbacktype
loopbackoftypeoneonlypacks,circuitBBG4/BBG4B/BBG19For
are:valuesValidaddress.givenaonallowedistimeaat
terminal speedhighthetowardsdirectedisloopbackterminal
value.defaulttheisThisfacility.
facility DSX-3.thetowardsdirectedisloopbackfacility
COMMANDSRELATED
opr-lpbk-t3
FiberReachDDM-2000 2000June3Issue 11-107