Lucent Technologies FiberReach DDM-2000 User Manual

SET-SYNC 5of1Page SET-SYNC
NAME
CharacteristicsSynchronizationSetset-sync:
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
synchronizationswitching,modesynchronizationtheprovisionscommandThis
29-or3.1)ReleaseFiberReachwith(Starting28-type26-type,thewhensource,
ishardwaretiming4.0)ReleaseFiberReachwith(StartingOLIUstype
timed.linebetoprovisioned
incominganfromline-timedismodetimingprovisionedonlytheFiberReach,For
signals.outgoingallgeneratetousedisreferencetimingThisinterface.optical
timingtheofelementsnetworkotherfortimingaffectmaycommandthisofUse
network.
NOTE:
portsDCCorCITallforonlyusersprivilegedtoavailableiscommandThis
shelf.theon
FORMATINPUT
TIMEDLINE-SYSTEMSRING
set-sync:[mdsw= ModeSwitching ][,src= SynchronizationSource ];
set-sync:[mdsw= ModeSwitching ][,src= SynchronizationSource ]
[,auto= SyncAutoreconfiguration ];
OLIUs28-typeMain.inOLIUs29-typeor28-type26-type,withequipped(When
startingavailableareOLIUs29-typeand3.1,Releasewithstartingavailableare
4.0.)Releasewith
11-332 2000June3Issue FiberReachDDM-2000

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English