Lucent Technologies FiberReach DDM-2000 User Manual

SET-STATE-VT1 3of1Page SET-STATE-VT1
NAME
ChannelsVT1.5ofStateSetset-state-vt1:
FORMATINPUT
set-state-vt1: Address :ps= PrimaryState ;
DESCRIPTION
within:channelsVT1.5ofstatesthesetscommandThis
unitMaininOLIUs26-typewithequippedisshelfthe(ifinterfacesOC-1
slots)
unitMaininOLIUs28-typewithequippedisshelfthe(ifinterfacesOC-3
slots).
packs)circuitOLIU29G-Uusing(wheninterfacesOC-12
andfailuressignalofmonitoringtheoffandonturntousediscommandThis
channels.specifiedforsignalsmaintenance
OC-12orOC-3OC-1,withinchannelsVT1.5forsetbecanstatesChannel
interfaces.DS1tocross-connectedarethatinterfaces4.0)(Release
are:parametersinputThe
Address equippedisshelftheIfchannel(s).VT1.5theidentifiesAddress
are:addressesvalidslots,unitMaininOLIUs26-typewith
m-1-all, m-1-{1-7}-{1-4,all}
(inslotsunitMaininOLIUs28-typewithequippedisshelftheIf
are:addressesvalidthelater),,and3.1FiberReach
m-{1-3,all}-{1-7}-{1-4,all}
MainitsinpackscircuitOLIU29-typewithequippedisshelftheIf
are:addressesunitMainvalidtheslots,unit
m-{1-12,all}-{1-7,all}-{1-4,all}
ps theofonehavemaywhichstatechanneltheisPrimaryState
values:following
auto theMonitorautomatic.tostatechanneltheSet
conditions.statusoralarmreportnotdobutchannel,
channel.thisformonitoringperformancedonotDo
changeautomaticallydetected,issignalgoodaWhen
in-service.tostatechannelthe
nmon reportnotDomonitored.nottostatechanneltheSet
donotDochannel.theforconditionsstatusoralarm
notDochannel.thisformonitoringperformance
issignalgoodaifin-servicetostatechannelthechange
theuntilstatethisinremainwillchannelThedetected.
theuntilorcommandthiswithagainchangedisstate
11-326 2000June3Issue FiberReachDDM-2000

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English