Lucent Technologies FiberReach DDM-2000 - Set-Oc1

SET-OC1 2of1Page SET-OC1
NAME
CharacteristicsOC-1Setset-oc1:
FORMATINPUT
set-oc1: Address [:dgr= SignalDegradeThreshold ]
[,aisalm= Alarm ];
DESCRIPTION
line.OC-1specifiedaof(parameters)characteristicsthesetscommandThis
are:parametersinputThe
Address line(s).OC-1theidentifiesAddress
Addresses:OC-1Valid main-{1,2,all}all,
dgr asthresholddegradesignalthespecifiesSignalDegradeThreshold
thresholdthisWhen10.basethetologarithmaoftermsinBERa
hasparameterthisofvalueTheraised.bewillalarmancrossed,is
-6.isvaluedefaultThe-5.to-9ofrangea
NOTE:
OC-1eachofaddressesbothforvaluedegradesignalThe
pairline must signaltochangeanyTherefore,same.thebe
thetomadebeautomaticallywilladdressonefordegrade
software.thebyother
aisalm affectingnonservicetheoflevelalarmprovisionedtheisAlarm
values:followingthehasandAISlineOC-1(NSA)
cr alarmCritical
mj alarmMajor
mn alarmMinor
na (default).reportedbutalarmed,Not
11-278 2000June3Issue FiberReachDDM-2000