Lucent Technologies FiberReach DDM-2000 - Rtrv-Pm-T1

RTRV-PM-T1 4of1Page RTRV-PM-T1
NAME
T1MonitoringPerformanceRetrievertrv-pm-t1:
FORMATINPUT
rtrv-pm-t1: Address ;
DESCRIPTION
DS1moreoronewithassociateddataparameterthedisplayscommandThis
performanceDS1theifonlyavailableisandsystemthethroughpassingsignals
theviasetisfeaturemonitoring set-feat command.
registers.dailytoadditioninPM,DS1foravailableareregistersQuarter-hour
is:parameterinputThe
Address ports.T1orDS1ofaddresstheisAddress
systems):protected(1x1AddressesValid
{a,b,c,d}-1-{1-4,all}all,
systems):protected(1x7AddressesValid
{a,b,c}-{1,2}-{1-4,all}all,
d-1-{1-4,all}
portsaddressingWhenports.T12supportspackcircuitBBF6The
Specifyingvalid.are2and1numbersportonlyBBF6,aon all
only.2and1portsselects
follows:asappearsreportoutputThe
tropeRsutatSgnirotinoMecnamrofrePhtaP1SD*/
ss:mm:hhdd-mm-yytasretsigeryad:dezilaitinitsaL
=================================================== ==================
P-SAUP-SESP-SEP-VCL-SEtratSsserddA
EFP-SAUEFP-SESEFP-SEEFP-VCemiT
=================================================== ==================
nnnnnemitsserdda
nnnn
nnnnnemitsserdda
nnnn
.......
.......
.......
11-170 2000June3Issue FiberReachDDM-2000