Lucent Technologies FiberReach DDM-2000 - Rtrv-Attr-Cont

RTRV-ATTR-CONT 2of1Page RTRV-ATTR-CONT
NAME
ControlAttributeRetrievertrv-attr-cont:
FORMATINPUT
rtrv-attr-cont[: Address ];
DESCRIPTION
discretemiscellaneousofnameprovisionedthedisplayscommandThis
thebysetaspoints,controlenvironmental set-attr-cont command.
is:parameterinputThe
Address isaddressdefaultThepoint.controlenvironmentaltheofAddress
cont-all.
Addresses:Valid cont-{1-4,all}
follows:asappearsreportoutputThe
tropeRgninoisivorPtnioPlortnoC*/
===========================================================
noitpircseDsserddA
===========================================================
rotareneGtratS1-tnoc
pmuPtratS2-tnoc
3lortnoc3-tnoc
4lortnoc4-tnoc
/*
are:parametersoutputThe
Address point.controltheofaddresstheisThis
Description controlenvironmentaltheofdescriptionprovisionedtheisThis
point.
11-114 2000June3Issue FiberReachDDM-2000