Lucent Technologies FiberReach DDM-2000 - Set-Attr-Cont

SET-ATTR-CONT 2of1Page SET-ATTR-CONT
NAME
ControlAttributeSetset-attr-cont:
FORMATINPUT
set-attr-cont: Address :desc= Description ;
DESCRIPTION
environmentaltheofnamethe(define)provisiontousediscommandThis
points.control
are:parametersinputThe
Address isThereprovisioned.betopointcontroltheidentifiesAddress
parameter.thisfordefaultno
Addresses:Valid cont-{1-4}
desc Thepoint.controlthefornamedescriptiveaisDescription
andupper-string,alphanumericanbemaydescription
Symboliclong.characters26toupspaces,nowithlower-case
theofnamedescriptivetheinincludedbemaycharacters
point.control
eithermeaningsspecialhavecharacterssymbolicfollowingThe
becannotandinterfaceTL1X.25thefororinterfaceCITthefor
description:theinincluded
; semicolon ? markquestion
@ spacesignat
\ slashback ! pointexclamation
: colon = signequal
" quotedouble , comma
inincludedbecannotkeysspecialandcharacterscontrolAll
description.the
FiberReachDDM-2000 2000June3Issue 11-251