Lucent Technologies FiberReach DDM-2000 - Page 49

363-206-305
About This Document
Issue 3 June 2000
xlix
Figure 1. Safety Label Position on FiberReach Shelf
- NOTICE-
UNTERMINATED OPTICAL
CONNECTORS MAY EMIT LASER
RADIATION, DO NOT VIEW BEAM
WITH OPTICAL INSTRUMENTS
- DANGER -
INVISIBLE LASER RADIATION
WHEN OPEN, AVOID DIRECT
EXPOSURE TO BEAM.
- NOTICE-
UNTERMINATED OPTICAL
CONNECTORS MAY EMIT LASER
RADIATION, DO NOT VIEW BEAM
WITH OPTICAL INSTRUMENTS
- DANGER -
INVISIBLE LASER RADIATION
WHEN OPEN, AVOID DIRECT
EXPOSURE TO BEAM.
ATTENTION
GROUNDED STATIC
WRISTSTRAP REQUIRED
TO REMOVE COVER
1.POSITION AT 45 , AS SHOWN.
2.PULL COVER OUT.
3.TO REPLACE COVER,
REVERSE PROCESS
REMOVE
INSTALL
45
- NOTICE -
UNTERMINATED OPTICAL CONNECTORS MAY EMIT LASER RADIATION,
DO NOT VIEW BEAM WITH OPTICAL INSTRUMENTS
-
DANGER -
INVISIBLE LASER RADIATION WHEN OPEN,
AVOID DIRECT EXPOSURE TO BEAM.
SIDE MOUNTING BRACKET POSITIONS
(LEFT SIDE OF SHELF)