Lucent Technologies FiberReach DDM-2000 - Page 372

363-206-305
Administration and Provisioning
8-14
Issue 3 June 2000
Software Compatibility
8
Table 8-2 lists the SONET software compatibility within a subnetwork for the
Lucent 2000 Product Family systems. All configurations listed support Operations
Interworking (OI). The table lists all possible software combinations. Combinations
not listed are not supported.
Table 8-2. Software Compatibility
Table 8-3 lists the software and circuit pack compatibility matrix for FiberReach
Releases 2.2 through 4.0.
Release
Fiber
Reach
R2.2
with
26G2-U
Fiber
Reach
R3.0
with
26G2-U
Fiber
Reach
R3.1
with
26G2-U
Fiber
Reach
R4.0
with
26G2-U
Fiber
Reach
R2.2
with
28-Type
Fiber
Reach
R3.1
with
28-Type
Fiber
Reach
R4.0
with
28-Type
Fiber
Reach
R4.0
with
29-Type
OC-3, R7.2 X
*
* FiberReach shelf is not directly connected.
X
OC-3, R8.0 X* X*
OC-3, R8.1 X* X*
OC-3, R9.1 X X
OC-3, R11.0 X X
OC-3, R11.1 X X
OC-3, R13.0 X X X X X X
OC-3, R15.0 X X X X X X
OC-12, R5.1 X* X
OC-12, R5.2 X* X
OC-12, R7.0 X* X* X* X X X
FiberReach, R3.0 X X X X* X* X*
FiberReach, R3.1 X X X X X X*
FiberReach, R4.0 X X X X X X
SLC-2000
, R3.3
SLC-2000
, R4.4
†
† SLC-2000 R4.4 through 4.6 can be used for NBS FITL applications. Contact Technical Support,
Access Products for compatibility details.
SLC-2000
, R4.6
†
FT-2000, R7.2 X* X
FT-2000, OC-48
R8.0
X* X* X* X X X
FT-2000, OC-48
R8.1
X* X* X* X X X
FT-2000, R9.0 X* X* X* X X X