TAP-102
: Trouble Clearing 363-206-305
Page 14 of 14 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
56. Check far-end
TGS/TG3
option switches for proper line coding and frame
format settings (rtrv-sync). If no trouble found, check incoming timing
reference signals. If timing reference signals are bad, issue trouble report of
bad incoming timing reference signal(s). If no trouble found with timing
references, replace far-end
TGS/TG3
circuit packs.
57.
STOP. YOU HAVE COMPLETED THIS PROCEDURE
.
To Next Page
Loading...