363-206-305 Detailed Level Procedure:
DLP-513
Issue 3, June 2000 Page 1 of 8
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
Set Circuit Pack Options
1.
NOTE:
When a replacement circuit pack (except the SYSCTL) is configured the
same as the original circuit pack, it may be inserted with no further action.
When a replacement circuit pack is different (different code or different
switch options) from the original, the SYSCTL UPD/INIT button must be
momentarily depressed (or use the "update" command) to update the
inventory.
Find the circuit pack in Table A and go to the indicated step. If you were sent
here from another procedure, return to that procedure after setting options.
* There are no option switches on these circuit packs.
Table A – Circuit Packs
Circuit Pack Step
BBG8/BBG8B SYSCTL
Step 2
22D-U/22F-U/22F2-U OLIU*
—
22G2-U/22G3-U/22G4-U OLIU*
—
26G-U/26G2-U OLIU*
—
28G-U/28G2-U OLIU*
—
29G-U/29H-U OLIU*
—
BBF1/BBF1B DS1
Step 7
BBF3/BBF3B DS1PM
Step 7
BBF6 T1EXT
Step 11
BBF8 HDSL
Step 13
BBG4/BBG4B/BBG19 DS3
Step 16
To Next Page
Loading...