Lucent Technologies FiberReach DDM-2000 - Page 1559

363-206-305 Detailed Level Procedure:
DLP-514
Issue 3, June 2000 Page 7 of 22
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
Notes:
1. Measured power is defined to be the measured power of the light emitted from receive fiber con-
nector at OLIU.
2. The minimum measured received power allows for optical path penalty and unallocated margin.
Connector loss is not allotted for; it should already be accounted for in the optical power measure-
ment.
3. The margin for falling within the max rx power is 1.0 dB
.
Table B – DDM-2000 FiberReach OC-1 to DDM-2000 OC-3 Shelf Measured
Optical Power and Required Lightguide Buildouts (LBOs)
Receiver
Transmitter
26G-U/26G2-U OLIU
(DDM-2000 FiberReach)
27G-U/27G2-U OLIU
(DDM-2000 OC-3)
Received
Power(dBm)
LBO
(dB)
Received
Power(dBm)
LBO
(dB)
26G-U/26G2-U OLIU
( FiberReach/
DDM-2000 OC-3)
0.0 to -5.0 15 0.0 to -5.0 15
-5.0 to -10.0 10 -5.0 to -10.0 10
-10.0 to -15.0 5 -10.0 to -15.0 5
-15.0 to -31.0 0 -15.0 to -31.0 0
27G-U/27G2-U OLIU
(DDM-2000 )
0.0 to -5.0 15
-5.0 to -10.0 10
-10.0 to -15.0 5
-15.0 to -31.0 0
Table C – Universal Single-Mode (SM-SM or SM-MM) ST Lightguide Buildouts
Lightguide
Buildout (LBO) Code Comcode
Connector
Type
Fiber
Connection Color
0 dB A3070 106795354
ST
SM-SM & MM-MM White
5 dB A3070B1 107406183
ST
SM-SM Yellow
10 dB A3070D1 107406191
ST
SM-SM Yellow
15 dB A3070F1 107406209
ST
SM-SM Yellow
5 dB ASTS5 108053091
ST
SM-SM Green
10 dB ASTS10 108053190
ST
SM-SM Green
15 dB ASTS15 108053240
ST
SM-SM Green
5 dB ASTM5 108052960
ST
SM-MM Beige
10 dB ASTM10 108052994
ST
SM-MM Beige
15 dB ASTM15 108053018
ST
SM-MM Beige