Lucent Technologies FiberReach DDM-2000 - Page 1564

DLP-514
: Detailed Level Procedure 363-206-305
Page 12 of 22 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
Table I – DDM-2000 FiberReach Operating at an OC-3 Rate to DDM-2000 OC-3 Shelf
Measured Optical Power and Required LBO
tpa 852408/01
Receiver
28G-U
28G2-U
OLIU
LBO ReceivedLBOReceivedLBOReceivedLBOReceivedLBOReceived
(dB) Power(dBm)(dB)Power(dBm)(dB)Power(dBm)(dB)Power(dBm)(dB)Power(dBm) Transmitter
15 15
10 10 10
555
0 00 0 0
0
0
0
Notes:
DDM-2000 OC-3 to DDM-2000 FiberReach Operating at an OC-3 Rate Measured Optical Power and Required LBO
22F OLIU
22F-U OLIU
22F2-U OLIU
22G-U OLIU
22G2-U OLIU
22G3-U OLIU
22G4-U OLIU
22D-U OLIU
(Controlled Env.)
22D-U OLIU
(Uncontrolled Env.)
0.0 to -5.0
-5.0 to -10.0
-10.0 to -15.0
-15.0 to -33.8
0.0 to -5.0
-5.0 to -10.0
-10.0 to -15.0
-15.0 to -31.80.0 to -34.0-8.0 to -34.0
-3.0 to -8.0
0.0 to -3.0
0.0 to -34.0
0.0 to -34.0
-8.0 to -34.0
-14.0 to -34.0
22G-U/22G2-U/22G3-U/
22G4-U OLIU
22F/22F-U/22F2-U OLIU
28G-U/28G2-U OLIU
21D/21D-U/22D-U OLIU
(Controlled &
Uncontrolled Env.)
(MM Fiber Only)
1. Measured power is defined to be the measured power of the light emitted from receive fiber connector at OLIU.
2.The minimum measure receive power allowed for optical path penalty and unallocated margin.Connectyor loss is
not allotted for, it should already be accounted for in the optical power measurement.
3.The margin for falling within the max rx power is 1.0 dB.