DLP-526
: Detailed Level Procedure 363-206-305
Page 8 of 18 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
14. After all cross-connections are made, use the rtrv-alm: command to verify
no alarms are present.
15. If ne-acty inc. VT AIS, inc. STS1 AIS, inc. VT unequipped, or
inc. STS1 unequipped alarms are present, look for missing or improperly
made cross-connections. Use
TAP-118
to locate missing cross-connections, if
required.
To Next Page
Loading...